Husqvarna 125 TC EU Owner's Manual page 66

12 BRAKE SYSTEM
–
Insert the brake linings, insert pin
Info
Always change the brake linings in pairs.
Info
Make sure that decoupling plate
brake lining.
–
Operate the foot brake lever several times until the brake linings are lying correctly
against the brake disc and there is a pressure point.
B01905-10
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
Info
Clean up overflowed or spilt brake fluid immediately with water.
B01903-10
4 , and mount cotter pins
7 is mounted on the piston side of the
A
.
p. 100)
1 2
with membrane
3 .
and the O-ring.
64