Menus; File Menu - Sony DWR-R02D User Manual

Property List tab
Displays a list of setting values for multiple receivers and
transmitters. The devices displayed here are those that are
registered to the pages displayed in the status viewer. You
can control the receivers and transmitters by selecting the
cells in the list and modifying the settings.
For details, see "Property List Tab" on page 24.
RF Chart Grapher tab
Records the signal reception status obtained from the
receivers and up to 24 hours worth of warnings related to
the reception status.
For details, see "RF Chart Grapher Tab" on page 25.
RF Chart Analyzer tab
Allows you to view the information saved in the RF Chart
Grapher tab.
For details, see "RF Chart Analyzer Tab" on page 27.

Menus

File menu

This menu allows you to load existing setting files and
save settings.
The File menu has the following commands.
Note
The New, Open, and Save commands can only be used in
offline mode.
New: Creates a new settings file.
Open: Opens a setting file.
Save: Saves the current settings to a setting file that is
already open by overwriting the contents of the file. For
setting files that are still unnamed, this command can be
used in the same way as the "Save as" command to add a
name to a setting file before saving it.
Save as: Adds a name to the current settings and saves
them to a setting file (file extension: dwl2).
Exit: Exits the Wireless Studio software.
View menu
This menu allows you to show or hide each window, and
restore the size and layout of each window to their default
state from immediately after installation.
The View menu has the following commands:
Default Size and Layout: Restores the size and layout of
windows to their default state from immediately after
installation.
Device List: Shows or hides the device list.
Status Viewer: Shows or hides the status viewer.
Message Log: Shows or hides the Message Log tab of the
sub window.
Property List: Shows or hides the Property List tab of the
sub window.
RF Chart Grapher: Shows or hides the RF Chart Grapher
tab of the sub window.
RF Chart Analyzer: Shows or hides the RF Chart
Analyzer tab of the sub window.
Device menu
This menu allows you to make network connection
settings for each device.
The Device menu has the following commands:
Online monitoring and control: Switches between
online mode and offline mode. The system is in online
mode when the check mark appears next to the command,
and offline mode when the check mark is cleared.
Load settings: Applies the setting values configured in
Wireless Studio to the receivers and transmitters (available
in offline mode only).
For details, see "Using Settings Files" on page 17.
9
Menus