Table of Contents
Advertisement
Menus
[File] menu
This menu allows you to load existing setting files and
save settings.
The [File] menu has the following commands.
Note
The [New], [Open], and [Save] commands can only be
used in offline mode.
New: Creates a new settings file.
Open: Opens a setting file.
Save: Saves the current settings to a setting file that is
already open by overwriting the contents of the file. For
setting files that are still unnamed, this command can be
used in the same way as the [Save as] command to add a
name to a setting file before saving it.
Save as: Adds a name to the current settings and saves
them to a setting file (file extension: dwl2).
Exit: Exits the Wireless Studio software.
[View] menu
This menu allows you to show or hide each window, and
restore the size and layout of each window to their default
state from immediately after installation.
The [View] menu has the following commands:
Default Size and Layout: Restores the size and layout of
windows to their default state from immediately after
installation.
Device List: Shows or hides the [Device List].
Status Viewer: Shows or hides the status viewer.
Message Log: Shows or hides the [Message Log] tab of
the sub window.
Property List: Shows or hides the [Property List] tab of
the sub window.
RF Chart Grapher: Shows or hides the [RF Chart
Grapher] tab of the sub window.
RF Chart Analyzer: Shows or hides the [RF Chart
Analyzer] tab of the sub window.
Spectrum Analyzer: Shows or hides the [Spectrum
Analyzer] tab of the sub window.
Simple Status Viewer: Shows or hides the [Simple Status
Viewer] tab of the sub window.
[Device] menu
This menu allows you to make network connection
settings for each device.
The [Device] menu has the following commands:
Online monitoring and control: Switches between
online mode and offline mode. The system is in online
mode when the check mark appears next to the command,
and offline mode when the check mark is cleared.
Load settings: Applies the setting values configured in
Wireless Studio to the receivers and transmitters (available
in offline mode only).
For details, see "Using Settings Files" on page 21.
Add a new device: Opens the [Add a new device]
window. Use this when entering IP addresses to add
devices to the device window manually.
For details, see "Manually adding a receiver/RMU-01 to
the [Device List] window" on page 28.
Search devices: Automatically detects the receivers and
RMU-01 units on the same subnet (available in online
mode only).
Omit IP address list: Opens the [Omit IP address list]
window (available in offline mode only).
For details, see "[Omit IP address list] Window" on
page 52.
Setting lock: Opens the [Setting lock] window. Use this to
disable or enable the modification of receiver and
transmitter settings from Wireless Studio.
For details, see "[Setting lock] Window" on page 52.
Pairing wizard: Opens the [Pairing Wizard] dialog box.
Use this to pair receiver channels and transmitters.
For details, see "Pairing Receiver Channels and
Transmitters" on page 18.
Channel Plan Adviser: Opens the [Channel Plan Adviser]
window. Use this to select channel plans using [Channel
Plan Adviser].
For details, see "Selecting Channel Plans" on page 16
and "[Channel Plan Adviser] Window" on page 47.
[Option] menu
The [Option] menu has the following commands:
Receiver CH Label settings: Opens the [Receiver CH
Label settings] window. Use this to configure labels for
each receiver channel.
For details, see "[Receiver CH Label settings] Window"
on page 53.
GP/CH Display settings: Opens the [GP/CH display
setting] window. Use this to configure the settings for the
groups and channels displayed on Wireless Studio.
For details, see "[GP/CH display setting] Window" on
page 53.
13
Advertisement
Table of Contents
