Sony DWR-R02D User Manual page 16

The system enters online mode, and the receivers are
automatically detected and added to the device list
window.
2
Perform one of the following to open the Property
window.
• Select a receiver or receiver channel in the device
list, and click the Property window button in the
upper part of the device list window.
• Right-click a receiver or receiver channel in the
device list, and select "Property" in the context
menu that appears.
• Right-click the meter icons that appear in the status
viewer, and select "Property" in the context menu
that appears.
3
Configure the settings in the Property window.
Changes to the settings are sent to receiver channels
and transmitters immediately and applied.
16
Basic Operations
For details on the settings in the Property window, see
"Property Window" on page 28.
Controlling devices from the Property List
tab of the sub window
Perform the following to control devices from the Property
List tab of the sub window.
1
Place a check mark next to "Online monitoring and
control" in the Device menu.
The system enters online mode, and the receivers are
automatically detected and added to the device list
window.
2
Click the Property List tab in the sub window.
The Property List tab appears.
Receiver channels that are registered to the status
viewer appear in the Property List tab.
If the receiver channel for which you want to configure
settings does not appear in the Property List tab,
display the page on which the receiver channel is
registered in the status viewer, or register the receiver
channel to the status viewer.
For details on changing the page displayed in the
status viewer, see "Status Viewer and Meter Icons" on
page 21.