Controlling Devices - Sony DWR-R02D User Manual

The receiver channels for all the receivers that appear
in the device list appear here.
4
Select the receiver channel for pairing, and click
"Next >."
The following screen appears.
5
Operate the transmitter for pairing to set it to pairing
mode, and click "Next >."
When the transmitter is detected, the following screen
appears.
6
Select the transmitter for pairing, and click "Next >."
Information regarding remote control is exchanged
between the receiver and the transmitter.
When the information exchange is complete, the
following screen appears.
The names of receiver channels and transmitters that
have already been paired appear here.
The "Transmitter Name" column to the right of the
receiver channels will be blank for receivers that have
not yet been paired.
If receiver channels that have not yet been paired exist,
click "Continue" and pair the channels by repeating
the above procedure from step 3.
7
When all necessary pairings are complete, click
"Finish."
The wizard closes.
The receiver channels and transmitters are now paired, and
remote control via wireless remote control is enabled.

Controlling Devices

You can control devices from the Property window and the
Property List tab of the sub window in Wireless Studio.
The Property window displays information about the
selected receiver. You can configure settings in the
Property window while viewing the meter icons in the
upper part of the window.
The Property List tab of the sub window displays a list of
settings for the receiver channels and transmitters
displayed in the status viewer. You can configure settings
for multiple receiver channels and transmitters
simultaneously in the Property List tab.
Controlling devices from the Property
window
Perform the following to control devices from the Property
window.
1
Place a check mark next to "Online monitoring and
control" in the Device menu.
15
Basic Operations