Selecting Channel Plans - Sony DWR-R02D User Manual

Selecting Channel Plans

To ensure stable operations, select a channel plan that is
suitable for your signal environment.
In Wireless Studio, you can ensure more stable operations
by performing the procedure found in Channel Plan
Adviser to select channel plans.
The following modes are available in Channel Plan
Adviser.
Basic mode: This mode allows you to select a channel plan
that avoids signal interferences detected by the receiver's
channel scan function.
Advanced mode: In addition to performing channel scan
as in Basic mode, this mode allows you to select a channel
plan while taking into account frequencies that are being
used by known TV broadcasts or other wireless devices.
For details, see "Channel Plan Adviser Window" on
page 30.
This section describes how to select channel plans using
the simpler Basic mode.
For details on selecting channel plans using Advanced
mode, see "Selecting the channel plan" on page 31.
1
Place a check mark next to "Online monitoring and
control" in the Device menu.
The system enters online mode, and the receivers are
automatically detected and added to the device list
window.
2
Select "Device menu > Channel Plan Adviser."
The following screen appears, and Channel Plan
Adviser starts.
3
Select "Basic mode," and click "Next >."
The following screen appears.
The receivers for which channel scan will be
performed will be displayed here for each frequency
band.
4
Click "Start scan."
Channel scan is performed, and the results are plotted
on the frequency spectrum display in the upper part of
the screen.
5
Click "Next >."
The following screen appears.
Candidate channel plans and the number of receivers
that can use the channel plans at the same time will be
displayed here for each frequency band.
6
Select the "Group type" to use for each frequency
band.
Select the group type based on the device
configuration.
Sony preset GP [Digital system only]: Select this
when only Sony digital wireless systems are used.
Sony preset GP [With Sony analog system]: Select
this when the configuration also includes Sony analog
wireless systems.
Loaded from cpa file: Select this to use channel plans
that were selected during previous uses of Channel
Plan Adviser.
13
Basic Operations