Pairing Receiver Channels And Transmitters - Sony DWR-R02D User Manual

User define: Select this to use user defined channel
plans.
7
Click "Next >."
The following screen appears.
The selected channel plan is assigned to the receivers
here.
8
Click "Auto."
The channel plan is assigned automatically.
Note
You can also assign channels one at a time by selecting
the receiver and frequency, and clicking the T button.
9
Click "Next >."
Configuration of the assigned channel plan starts for
the receivers.
If the receivers are already paired with transmitters,
the configuration is also sent to the transmitters.
The following screen appears.
10
Click "Finish."
Channel Plan Adviser closes.
14
Basic Operations
Pairing Receiver Channels and
Transmitters
To enable remote control of transmitters via wireless
remote control, each receiver channel must be paired with
a transmitter.
By using the pairing wizard in Wireless Studio to perform
this operation, you can perform pairing for multiple
channels with ease.
Perform pairing with the pairing wizard as follows.
1
Place a check mark next to "Online monitoring and
control" in the Device menu.
The system enters online mode, and the receivers and
RMU-01 units are automatically detected and added to
the device list window.
2
Select "Device menu > Pairing wizard."
The following screen appears, and the pairing wizard
starts.
3
Click "Next >."
The following screen appears.