Table of Contents
Advertisement
d Unlock Settings/Lock Settings button
When setting modification is disabled due to the Setting
lock function, click this button and enter the password to
temporarily enable setting modification.
Click the button again to relock settings.
For details on the Setting lock function, see"Setting lock
Window" on page 35.
e Clear Indication button
Clears the yellow indications that appear when setting
values for receivers and transmitters fail to be applied.
Use this when the indications are no longer necessary.
Changing settings for multiple receiver channels
as a group
1
Select the GP/CH item for multiple receiver channels
in the Property List tab.
"..." appears for the cells.
2
Click "..."
The "GP/CH Selection" dialog box appears.
3
Select a frequency group under "GP" in the upper-
right part of the "GP/CH Selection" dialog box.
A list of frequency channels that belong to the selected
frequency group appears under the "Channel" column.
4
Select the receiver channel for which you want to
change settings from the receiver channel list in the
left part of the "GP/CH Selection" dialog box.
5
Select the frequency channel that you want to assign to
the selected receiver channel from the "Channel"
column, and click "<--."
The group and channel are assigned to the receiver
channel.
To cancel group and channel assignments, click "-->."
6
Repeat steps 4 to 5 to assign frequency channels to
other receiver channels, and click "OK."
The changed settings are applied.
RF Chart Grapher Tab
You can use the RF Chart Grapher in Wireless Studio to
record information on the signal environment and any
alerts that occurred during operation. This allows you to
determine the cause-and-effect relationship between the
signal environment and specific alerts.
1
2
4
a Graph items
Capture: Starts acquisition and graph display of RF and
QL data for all receiver channels displayed in the receiver
channel list.
Quit: Stops acquisition and graph display of RF and QL
data for all receiver channels displayed in the receiver
channel list.
Clear all: Clears the RF and QL data acquired for all
receiver channels displayed in the receiver channel list and
clears the graph display.
3
5
Sub Window
25
Advertisement
Table of Contents
