Omit Ip Address List Window - Sony DWR-R02D User Manual

8
Assign the selected channel plan to the receiver.
Automatic assignment
Click "Auto."
Starting with the lowest-frequency plans in the
channel plan list, the frequencies are automatically
assigned to the receiver's receiver channels.
Individual assignment
Select a receiver channel from the receiver channel
list, and then select the frequency you want to assign
in the channel plan list.
Click the T button to assign the frequency to the
receiver channel.
To cancel an assignment
Select the respective receiver channel in the receiver
channel list, and click the t button to cancel the
assignment.
9
When you finish assignments for all the receiver
channels, click "Next >."
The frequency assignment settings are sent to the
receiver.
Work files
In Channel Plan Adviser, you can save the information
entered for each step to a work file (.cpa) and load the work
file whenever necessary.
The following is saved to a work file.
• Target frequency bands
(entered in step 2 of "Selecting the channel plan")
• TV Channels
(entered in step 3 of "Selecting the channel plan")
• Frequencies used by other wireless devices
(entered in step 4 of "Selecting the channel plan")
• Channel scan conditions and scan results
(entered in step 5 of "Selecting the channel plan")
• Conditions for avoiding interference
(entered in step 6 of "Selecting the channel plan")
• Selected channel plan
(entered in step 7 of "Selecting the channel plan")
For details, see "Selecting the channel plan" on page 31.
34
Setup Windows
User defined files
You can use a frequency list from a user defined file
(.chplan) to specify a user defined channel plan.
Load the user defined file in Channel Plan Adviser, and
determine frequencies while referring to the signal
environment information from scan results, etc.
To create user defined files
Use a text editor such as Notepad to create the file. Be sure
to specify ".chplan" as the file extension.
Define one frequency per row.
Note
When the "#" sign is entered, text that is entered after the
"#" in that row will be considered comments.
Example: When defining a 12-ch plan that connects group
D1 of TV42-45 (US Model) for simultaneous operation.
# User define Channel Plan
# TV42-45 / D1 Group
638.250 # 42-02
638.750 # 42-06
639.250 # 42-10
639.750 # 42-14
640.250 # 42-18
640.750 # 42-22
641.250 # 42-26
641.750 # 42-30
642.250 # 42-34
642.750 # 42-38
643.250 # 42-42
643.750 # 42-46
Note
Only the frequencies indicated in the frequency list
supplied with the receiver can be used.

Omit IP address list Window

When you register an IP address in this list, the IP address
is excluded from automatic detection and will not appear
in the device list window.
Use this function when multiple systems are connected on
the same subnet, and you do not want to display the
devices from other systems.
To display the Omit IP address list window, select "Device
menu > Omit IP address list".
The "Omit IP address list" command can only be used in
offline mode.