Sony DWR-R02D User Manual page 31

B Procedure items
Displays the list of steps to perform in Channel Plan
Adviser.
The items also act as shortcuts to each step, so you can
click an item to jump directly to the target step operation.
Certain steps are omitted in Basic mode. These omitted
steps cannot be selected.
C Save and load work files
When you click the "Save as" button, the file save dialog
box appears.
This allows you to save your progress and the information
you entered to a file.
When you click the "Load" button, the file load dialog box
appears.
This allows you to load a previously saved file from which
to continue the channel plan selection process.
For details on work files, see "Work files" on page 34.
b Frequency spectrum display area
Displays the information entered for each step on a
frequency spectrum graph.
2
A Frequency spectrum
Displays the information entered for each step in a graph.
TV broadcast waves and interference from other wireless
devices are displayed in red.
Interference detected with the channel scan function is
displayed in yellow.
The threshold value for determining interference is
displayed as a blue line.
The usable channels in the selected channel plan are
displayed in green. Channels that are unusable due to
interference or other reasons are displayed in dark green.
B Display range scroll bar
Scrolls through the frequency range display.
C Display scale
Changes the scale of the frequency display.
c Wizard area
Information necessary for channel selection is entered here
according to the step that is displayed.
1
3
1
A Information entry area
Enter information according to the content displayed.
B Operation buttons
Previous: Go back to the previous step.
Next: Go to the next step.
Finish: Complete the procedure, and close Channel Plan
Adviser.
Abort: Discard any operation progress, and close Channel
Plan Adviser.
Selecting the channel plan
The section describes how to select channel plans using the
Advanced mode.
For details on selecting channel plans using Basic mode,
see "Selecting Channel Plans" on page 13.
1
Select "Advanced mode," and click "Next >."
You can select whether to select the channel plan using
Basic or Advanced mode here.
2
Select the frequency bands, and click "Next >."
Select the frequency bands from which you will select
the channel plan.
2
31
Setup Windows