Rf Chart Analyzer Tab - Sony DWR-R02D User Manual

used for monitoring excessively high RF levels. The
"Individual min" display mode is used for monitoring
excessively low RF levels. For either display mode, you
can specify what to monitor by selecting or clearing the
"a-branch," "b-branch," and "diversity" check boxes.
QL
Shows or hides QL information in the graph display area.
Alert
Shows or hides alert information in the graph display area
and the alert display area.
Time
Specifies the display mode for time axis in the graph
display area.
Absolute: Displays the time.
Relative: Displays the amount of time that has elapsed
from the display start time.
Mark function
In addition to displaying alerts that occur during signal
environment monitoring, you can also insert memos
within the graph in the RF Chart Grapher. Memos added
via the Mark function will appear as blue marks on the
graph.
The content of a memo will be displayed as a tooltip when
you move the mouse cursor to a mark on the graph. You
can also drag and move marks using the mouse.

RF Chart Analyzer Tab

In the RF Chart Analyzer tab, you can view the contents of
files recorded with the RF Chart Grapher. This allows you
to analyze the results of signal environment monitoring.
You can also use the Mark function to add memos to the
monitoring results.
1
2
a File area
Open: Registers the file to the file list. Only files created
using the RF Chart Grapher can be registered to the file
list.
Save as: Saves the information of the file selected in the
file list.
Close: Deletes the file selected in the file list from the file
list.
Close all: Deletes all the files registered to the file list from
the file list.
b File list
Displays the list of loaded files.
Note
The other items function identically to those in the RF
Chart Grapher tab.
For details, see "RF Chart Grapher Tab" on page 25.
27
Sub Window