Af Peak Hold Setting Window; Startup Setting Window - Sony DWR-R02D User Manual

a Copy all Transmitter Name to Label
Copies transmitter names to the labels of the
corresponding receiver channels.
b Setting item list
Receiver Name: Displays the receiver's name.
CH: Displays the receiver's channel information.
Transmitter Name: Displays the name of the transmitter
that is communicating with the receiver.
Label Name: Allows you to set a name for each receiver
channel. To set a name, enter the name and press the Enter
key.
Selecting whether to display labels and
transmitter names
You can specify whether to show or hide configured labels
and transmitter names on the main page of Wireless
Studio.
Label
Shows or hides labels. Place a check mark to show labels,
and remove the check mark to hide labels. The labels are
hidden under default settings.
Labels are displayed (or hidden) in the following areas.
• Device list
• Status viewer
• Property window
• Property List tab
• RF Chart Grapher tab
TX Name
Shows or hides transmitter names. Place a check mark to
show transmitter names, and remove the check mark to
hide transmitter names. The names are shown under
default settings.
Transmitter names are displayed (or hidden) in the
following areas.
• Device list
• Status viewer
• RF Chart Grapher tab
36
Setup Windows

AF peak hold setting Window

In the "AF peak hold setting" window, you can configure
hold settings for the peak levels of the AF level meters that
appear in the status viewer.
AF peak hold setting
Configures hold settings for the peak levels of the AF level
meters that appear in the status viewer.
1sec: Holds for 1 second.
HOLD: Hold is maintained until it is released.
Releasing the hold status
Peak levels that are being held can be released in the main
page of Wireless Studio.
Clicking "Clear AF Peak hold" in the status viewer
releases the hold status of the peak levels for all the
receiver channels displayed.

Startup setting Window

You can configure startup settings in the "Startup setting"
window.
a Startup from EXE file setting
Specify the startup mode used when starting Wireless
Studio from the start menu.
Place a check mark next to "Always work by below
setting" to always start Wireless Studio using the specified
mode.
Offline mode: Start Wireless Studio in offline mode.
Online mode: Start Wireless Studio in online mode.
1
2