Ntp Setup - CP Plus CP-UNR-1xxQ1 Series User Manual


Delete: Click it to remove specified item.

Edit: Click it to edit start address and end address. System can check the IP address validity
after the edit operation and implement IPv6 optimization.

5.6.6.3 NTP Setup

You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP
OS, you can use command "net start w32time" to boot up NTP service.
NTP setup interface is shown as in Figure 5-36.

Host IP: Input your PC address.

Port: This series NVR supports TCP transmission only. Port default value is 123.

Update interval: minimum value is 1. Max value is 65535. (Unit: minute)

Time zone: select your corresponding time zone here.

Update period: You can input interval here.

Manual update: It allows you to synchronize the time with the server manually.
Here is a sheet for your time zone setup.
City /Region Name
London
Berlin
Cairo
Moscow
New Deli
Bangkok
Beijing (Hong Kong)
Tokyo
Sydney
Hawaii
Alaska
Pacific Time(P.T)
American Mountain Time(M.T)
American Central Time(C.T)
American Eastern Time(E.T)
Atlantic Time
Figure 5-35
Time Zone
GMT+0
GMT+1
GMT+2
GMT+3
GMT+5
GMT+7
GMT+8
GMT+9
GMT+10
GMT-10
GMT-9
GMT-8
GMT-7
GMT-6
GMT-5
GMT-4
75