Alarm Output; Manual Record; Manual Record Menu; Basic Operation - CP Plus CP-UNR-1xxQ1 Series User Manual
Cp plus p-unr-1xxq1 series; cp-unr-1xxq1p series; cp-unr-3xxq2-xu series; cp-unr-3xxq2p-xu series; cp-unr-2xxq2 series; cp-unr-2xxq2p series; cp-unr-2xxq4 series; cp-unr-2xxq4p series; cp-unr-4xxq8-xu series; cp-unr-3xxt2 series; cp-unr-3xxt2p series; cp-
Table of Contents
Advertisement
5.7.4
Alarm Output
Here is for you to set proper alarm output.
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu. See Figure
5-82.
5.7.5
Manual Record
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
5.7.5.1 Manual record menu
Right click mouse or in the main menu, Advanced->Manual Record.
Manual record menu is shown as in Figure 5-83.
5.7.5.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon " ○ " to select
corresponding channel.
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
Figure 5-81
to select the corresponding alarm output.
Figure 5-82
104
Advertisement
Table of Contents
