Gui Operation; Login - CP Plus CP-UNR-1xxQ1 Series User Manual

5 GUI Operation

Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the rear panel and then boot up the device to view the analog video output. You can use
the mouse to implement some GUI operation.

5.1 Login

After device booted up, the system is in multiple-channel display mode. See Figure 5-1.Please
note the displayed window amount may vary. The following figure is for reference only.
System consists of four accounts:

Username: admin. Password: admin. (administrator, local and network)

Username: 888888. Password: 888888. (administrator, local only)

Username: 666666. Password: 666666(Lower authority user who can only monitor,
playback, backup and etc.)

Username: default. Password: default(hidden user)
You can use USB2.0 mouse to input. Click
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure
will result in account lock!
Figure 5-1
to switch between numeral, English character
Figure 5-2
50