Record light
1-16
Remote
control
ACT
indication light
Status indication
Status
light
Power indication
PWR
light
2.1
Rear Panel
2.2.1
CP-UNR-1xxQ1_ CP-UNR-1xxQ1P Series
The CP-UNR-1xxQ1P series rear panel is shown as below. See Figure 2-9.
The CP-UNR-1xxQ1P series rear panel is shown as below. See Figure 2-10.
For 4/8/16 channel device: indication light on means that the
channel is in recording.
For 32 channel device, channel 17-32 reuse the indication light 1
to 16. For example, the first indication light has the following four
statuses:
The first indication light flashes slowly when the 1-channel is
recording while the 17-channel does not record.
The firs indication light flashes quickly when the 1-channel
does not record while the 17-channel is recording.
The first indication light is on when the 1-channel is
recording and the 17-channel is recording.
The first indication light is off when the 1-channel does not
record and the 17-channel does not record.
Remote control indication light
If there is Fn indication light, current status indication light is null.
Power indication light
Figure 2-9
Figure 2-10
24