Cp-Unr-3Xxq2P-Xu Series - CP Plus CP-UNR-1xxQ1 Series User Manual

Port Name
C1 to C3
A RS485 (RS-485)
communication port
B
Power input port
Power button
/
2.2.3

CP-UNR-3xxQ2P-XU Series

The rear panel is shown as below. See Figure 2-12.
Please refer to the following sheet for detailed information.
Port Name
S232(RS-422)
R
HDMI
VGA
Connection Function
USB2.0 port.
Network port
232 debug
COM.
High Definition
Media
Interface
VGA video
VGA
output port
Connection Function
2:port NO2～C2,Group 3:port
NO3～C3）).Output alarm signal to
the alarm device. Please make
sure there is power to the external
alarm device.
NO：Normal open alarm output port.

C：Alarm output public end.

RS485_A port. It is the cable A. You
can connect to the control devices such
as speed dome PTZ.
RS485_B.It is the cable B. You can
connect to the control devices such as
speed dome PTZ.
/ Input 12V DC.
Power on/off button.
/
Figure 2-12
Connect to USB2.0 mouse.
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
It is for general COM debug to configure IP
address or transfer transparent COM data.
High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
26