Hdd Installation; Cp-Unr-1Xxq1/Cp-Unr-1Xxq1P Series - CP Plus CP-UNR-1xxQ1 Series User Manual

3 HDD Installation

Important：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only.
For the first time install, please be aware that whether the HDDs have been installed.
You can refer to the Appendix for recommended HDD brand. Please use HDD of 7200rpm or
higher. Usually we do not recommend the PC HDD.
Please follow the instructions below to install hard disk.
3.1
CP-UNR-1xxQ1_ CP-UNR-1xxQ1P
1. Loosen the screws of the
upper cover and side panel.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
Series
2. Fix four screws in the HDD
(Turn just three rounds).
5.
Fix the HDD firmly.
8. Secure the screws in the
rear panel and the side panel.
3. Place the HDD in accordance with
the four holes in the bottom.
6. Connect the HDD cable and
power cable.
45