3.3
CP-UNR-2xxQ2/CP-UNR-2xxQ2P/CP-UNR-2xxQ4/CP-UNR-2xxQ4P
Series
① Use 4 screws to secure the HDD
③ Pull the HDD knob up when you put the HDD
into the box in case the knob buckle may strike
the front panel.
3.4
CP-UNR-4xxQ8-XU/ CP-UNR-3xxT8 Series
① Use the screwdriver to loose the screws of the rear panel and then remove the front cover.
② Put the HDD to the HDD box at the front.
④ Put the knob back after you insert the HDD
to the SATA board.
47