Cp-Unr-3Xxt2P Series - CP Plus CP-UNR-1xxQ1 Series User Manual

Port Name
A RS485
(RS-485)
communication
port
B
Power input
port
Power button
VIDEO OUT Video input
port
MIC IN Audio input
port
Audio output
MIC OUT
port
2.2.9

CP-UNR-3xxT2P Series

The CP-UNR-3xxT2P series rear panel is shown as below. See Figure 2-20.
Please refer to the following sheet for detailed information.
Port Name
USB2.0 USB2.0 port.
Network port
RS232 RS232 debug
COM.
Connection Function
alarm device.

NO：Normal open alarm output port.

C：Alarm output public end.
RS485_A port. It is the cable A. You can
connect to the control devices such as speed
dome PTZ.
RS485_B.It is the cable B. You can connect
to the control devices such as speed dome
PTZ.
/ Input 12V DC.
/ Power on/off button.
/ CVBS output
/ Bidirectional talk input port. It is to receive the
analog audio signal output from the devices
such as mike phone, pickup.
Audio output port. It is to output the analog
/
audio signal to the devices such as the sound
box.

Bidirectional talk output.

Audio output on 1-window video monitor.

Audio output on 1-window video
playback.
Figure 2-20
Connection Function
/ Connect to USB2.0 mouse.
/ 10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
/ It is for general COM debug to configure IP
address or transfer transparent COM data.
38