Encode - CP Plus CP-UNR-1xxQ1 Series User Manual

Parameter Function
Here is for you to modify system time. Please click Save button after
System
Time
your completed modification
Sync PC You can click this button to save the system time as your PC current
time.
Here you can select data format from the dropdown list.
Data
Format
Please select separator such as – or /.
Data
Separator
There are two options: 24-H and 12-H.
Time
Format
DST Here you can set day night save time begin time and end time. See
Figure 7-20and Figure 7-21.
Language Here you can view the system current language. You can select from
the dropdown list.
There are two options: stop recording or overwrite the previous files
HDD Full
when HDD is full.
Here you can select file size. The value ranges from 1 to 120
Pack
Duration
(minute). Default setup is 60 minutes.
When you are using one remote control to manage multiple devices,
Device No
you can give a serial numbers to the device.
Please note current series product does not support this function.
Video Here you can view video format such as PAL.
Standard
7.4.3.2

Encode

The encode interface is shown as in Figure 7-22.
Figure 7-22 Encode
128