Cp-Unr-3Xxt2 Series - CP Plus CP-UNR-1xxQ1 Series User Manual

Port Name
HDMI High Definition
Media
Interface
VGA VGA video
output port
2.2.7

CP-UNR-3xxT2 Series

The 52 series rear panel is shown as below. See Figure 2-18.
Please refer to the following sheet for detailed information.
Port Name
Power button /
Power input /
port
MIC IN Audio input port
MIC OUT Audio output port
1-16 Alarm input port
1-16.
Ground end
NO1 to NO5 5-ch alarm output
port
C1～C5
Connection Function
/ High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
/ VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
Figure 2-18
Connector Function
/ Power on/off button.
Input AC 220V power.
/
/ Bidirectional talk input port. It is to receive the
analog audio signal output from the devices such
as mike phone, pickup.
/ Audio output port. It is to output the analog audio
signal to the devices such as the sound box.

Bidirectional talk output.

Audio output on 1-window video monitor.

Audio output on 1-window video playback.
I/O port 
There are four groups. The first group is from
port 1 to port 4, the second group is from port
5 to port 8, the third group is from 9 to 12,
and the fourth group is from 13 to 16. They
are to receive the signal from the external
alarm source. There are two types; NO
(normal open)/NC (normal close).

When your alarm input device is using
external power, please make sure the device
and the NVR have the same ground.
Alarm input ground end.

5 groups of alarm output ports. (Group 1： port
NO1～C1,Group 2:port NO2～C2,Group
35