Setting; General - CP Plus CP-UNR-1xxQ1 Series User Manual

5.6 Setting

In main menu, highlight setting icon and double click mouse. System setting interface is shown as
below. See Figure 5-20.
Important
Please note you need to have the proper right to implement the following operation.
5.6.2

General

General setting includes the following items. See Figure 5-21.

System time: Here is for you to set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three denotations to separate date: dot, beeline and solidus.

DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 5-22. Here you can set start time and
end time by setting corresponding week setup. In Figure 5-22, enable date button, you can
see an interface is shown as in Figure 5-23. Here you can set start time and end time by
setting corresponding date setup.

Time format: There are two types: 24-hour mode or 12-hour mode.

Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight
difference maybe found in various series.)

HDD full: Here is for you to select working mode when hard disk is full. There are two options:
stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while
the next HDD is no empty, then system stops recording, If the current HDD is full and then
next HDD is not empty, then system overwrites the previous files.

Pack duration: Here is for you to specify record duration. The value ranges from 60 to 120
minutes. Default value is 60 minutes.

Device No: When you are using one remote control (not included in the accessory bag) to
control several NVRs, you can give a name to each NVR for your management.

Video standard: There are two formats: NTSC and PAL.
Figure 5-20
65