Ptz Control - CP Plus CP-UNR-1xxQ1 Series User Manual
Cp plus p-unr-1xxq1 series; cp-unr-1xxq1p series; cp-unr-3xxq2-xu series; cp-unr-3xxq2p-xu series; cp-unr-2xxq2 series; cp-unr-2xxq2p series; cp-unr-2xxq4 series; cp-unr-2xxq4p series; cp-unr-4xxq8-xu series; cp-unr-3xxt2 series; cp-unr-3xxt2p series; cp-
Table of Contents
Advertisement
7.2.5
PTZ Control
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to
chapter 0 PTZ).
Here you can view direction keys, speed, zoom, focus, iris, preset, tour, pan, scan, pattern, aux
close, and PTZ setup button.
Please note: open menu/close menu/up/down/left/right/confirm/cancel buttons are for speed
dome only.
PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.
Speed: The step 8 speed is faster than step 1.
Click PTZ set button, the interface is shown as in Figure 7-10.
Figure 7-9 PTZ Interface
Figure 7-10 PTZ Setup
You can click this icon to
display or hide the PTZ
control platform.
120
Advertisement
Table of Contents
