Network - CP Plus CP-UNR-1xxQ1 Series User Manual
Cp plus p-unr-1xxq1 series; cp-unr-1xxq1p series; cp-unr-3xxq2-xu series; cp-unr-3xxq2p-xu series; cp-unr-2xxq2 series; cp-unr-2xxq2p series; cp-unr-2xxq4 series; cp-unr-2xxq4p series; cp-unr-4xxq8-xu series; cp-unr-3xxt2 series; cp-unr-3xxt2p series; cp-
Table of Contents
Advertisement
Parameter
Data Bit
Stop Bit
Baud Bit
Parity
7.4.3.5
Network
Network interface is shown as in Figure 7-28.
Please refer to the following sheet for detailed information.
Parameter
IP Version
MAC Address
Function
Transparent COM: Network user can communicate with
RS232 COM device.
PTZ matrix: PTZ matrix protocol. You can use the device to
control the PTZ matrix.
The value ranges from 5 to 8.
There are three options: 1/2.
You can select corresponding baud bit here.
There are five options: none/odd /even/mark/space.
Figure 7-28 Network
Function
There are two options: IPv4 and IPv6. Right now, system
supports these two IP address format and you can access via
them.
The host in the LAN can get a unique MAC address. It is for
you to access in the LAN. It is read-only.
133
Advertisement
Table of Contents
