Playback - Basics; Playing Back A Tape - Sony Digital 8- TRV240 Operating Instructions Manual

- Playback - Basics -
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder.
You can control playback using the Remote Commander supplied with your
camcorder.
(1)
Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press 4+ to rewind the tape.
(5) Press ) to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. When you
close the LCD panel, sound is muted.
6
VOLUME
To stop playback
Press a.
When monitoring on the LCD screen
You can turn
the LCD panel over and move it back to the camcorder body with the LCD
screen facing out.
34