Dubbing
only desired
scenes
- Digital
program
editing
(on tapes)
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on "Memory Stick"s (except DCR-TRV240). See
page 146
for
more information.
Unwanted scene
Unwanted scene
Switch the order
Before operating
the Digital
program
editing
function
on
tapes recorded
other equipment
Step
1
Connecting the VCR (p. 75).
Step
2 Setting the VCR for operation (p. 75,80).
Step
3 Adjusting the synchronization of the VCR (p. 82).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital
program
editing
function
on tapes recorded
other equipment
Operation
1
Making a program (p. 84).
Operation
2 Performing the program (dubbing a tape) (p. 87).
Notes
l
The Digital program editing works only for tapes recorded in the Digital8
E3
system.
l
When you connect with an i.LINK cable (DV connecting cable), you may not be able to
operate the dubbing function correctly, depending on the VCR. Set CONTROL to IR
in the menu settings of your camcorder.
l
When editing digital video, the operation signals cannot be sent with LANC
0.
74