Preventing
accidental
erasure
- Image protection
- Except DCR-TRV240
You can protect selected images, to prevent accidental erasure of important images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1)
Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Play back the image you want to protect.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select PROTECT in m, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(6) Press MENU to make the menu settings disappear. The h
mark is displayed
beside the data file name of the protected image,
36
I
I\tiCAII I
MEMORY
SET
0
STILL SET
e
FILE NO.
";i
;;lXE&A;
ALL
*RETURN
~MENUI : END
To cancel image protection
Select OFF in step 5, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all information on the "Memory Stick", including the protected
image data. Before formatting a "Memory Stick", check its contents.
If the write-protect
tab on the "Memory
Stick" is set to LOCK
You cannot protect images.
170