Sony Digital 8- TRV240 Operating Instructions Manual page 132

Superimposing a still image in the "Memory Stick" on an image
-MEMORY MIX
Recording superimposed images on a "Memory Stick"' as a W If:: i
image
Before operation
Insert a "Memory Stick" is recorded still images into your camcorder.
(1)
Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MEMORY MIX.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/- to select the still image you want to superimpose.
To see the previous image, press MEMORY -. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM c--, M. LUMI f--+ C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM - The color (blue) scheme of the area in the still image which is
to be swapped with a moving picture
M. LUMI
- The color (bright) scheme of the area in the still image which
is to be swapped with a moving picture
C.CHROM
- The color (blue) scheme of the area in the moving picture
which is to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect becomes,
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be recorded on a "Memory Stick."
Recording is complete when the bar scroll indicator disappears.