Sony Digital 8- TRV240 Operating Instructions Manual page 80

Dubbing
only desired scenes - Digital program editing (on tapes)
Step 2: Setting the VCR to operate with the i.tlN,K c#Ae., ,a? : i >'\:$,F-
(DV connecting cable)
' " ""'.
,:,,
When you connect using i.LINK cable (DV connecting cable) (optional), follow the
procedure below.
(1)
Set the POWER switch to VCR on your camcorder.
(2) Turn the power of the connected VCR on, then set the input selector to DV
input. When you connect a digital video camera recorder, set its power switch
to VCR/VTR.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select IETC], then press the dial.
(5) For DCR-TRV240:
Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
For DCR-TRV340/TRV740/TRV840:
Turn the SEL/PUSH EXEC dial to select TAPE in VIDEO EDIT, then press the
dial.
(6) Turn the SEL/PUSH EXEC dial to select EDIT SET, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.
(8) Turn the SEL/PUSH EXEC dial to select i.LINK, then press the dial.
I
80