Using "Memory
Stick"-
Introduction
Selecting
the still image quality
mode
You can select the image quality mode in still image recording. The default setting is
SUPER FINE (DCR-TRV74O/TRV840), or FINE (DCR-TRV340).
(1)
Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MENU to display the menu settings.
(3) Turn the SELlPUSH EXEC dial to select STILL SET in 11-11, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5) Turn the SELlPUSH EXEC dial to select the desired image quality, then press
the dial.
MENU
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the type of images you are shooting.
119