Sony Digital 8- TRV240 Operating Instructions Manual page 106

Changing the menu settings
To make the menu display disappear
Press MENU.
Menu items are displayed as the following icons:
m MANUAL SET
M CAMERA SET
m VCR SET
m LCD/VF SET
n MEMORY SET (except DCR-TRV240)
a PRINT SET ( except DCR-TRV240)
m TAPE SET
B SETUP MENU
m OTHERS
Selecting the mode setting of each item
* is the default setting;' ,'>' y', :: ;$y$&
.$
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
POWER
Icon/item
Mode Meaning switch
m PROGRAM AE -
To suit your specific shooting requirement CAMERA
(P.
51)
MEMORY
P EFFECT
-
To add special effects like those in films or on
the TV to images (p. 47, 63)
CAMERA
VCR
D EFFECT
To add special effects using the various digital CAMERA
functions (p. 48, 64) VCR
FLASH MODE
l ON To fire the flash (optional) regardless of the
CAMERA
brightness of the surroundings MEMORY
AUTO The flash fires automatically.
AUTO 0 To fire the flash before recording to reduce the
red-eye
FLASH LVL
HIGH Makes the flash level higher than normal. CAMERA
0 NORMAL
LOW
Normal setting
Makes the flash level lower than normal.
MEMORY
N.S. LIGHT
l ON
OFF
To
use
the NightShot Light function (p. 29)
To cancel the NightShot Light function
CAMERA
MEMORY
AUTO SHTR
*ON
To automatically activate the electronic shutter
when shooting in bright conditions
CAMERA
MEMORY
OFF To not automatically activate the electronic
shutter even when shooting in bright conditions
Notes on FLASH
MODE
and
FLASH LVL
l
You cannot adjust FLASH MODE or FLASH LVL if the
flash (optional) is not
compatible with FLASH MODE or FLASH LVL.
l
FLASH MODE and FLASH LVL are displayed only when an external flash (optional)
is connected to the intelligent accessory shoe.
~
I
106