Sony Digital 8- TRV240 Operating Instructions Manual page 114

Changing the menu settings
Icon/item
(ETCI DATA CODE
POWER
Mode Meaning switch
0 DATE/CAM To display date, time and recording data during VCR
playback MEMORY
DATE
WORLD TIME -
To display date and time during playback
To set the clock to the local time CAMERA
Turn the SEL/PUSH EXEC dial to set a time MEMORY
difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the originally
set time.
BEEP
0 MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
CAMERA
VCR
MEMORY
NORMAL
To output the beep instead of the melodv
OFF To cancel all sound includinp shutter sound
COMMANDER 0
ON
OFF
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other VCR's remote control
CAMERA
VCR
MEMORY
DISPLAY
l
LCD
V-OUT/LCD
To show the display on the LCD screen and in
the viewfinder
To show the display on the TV screen, LCD
screen and in the viewfinder
CAMERA
VCR
MEMORY
Note
If
you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the screen even when your camcorder is
connected to outputs on the TV or VCR. (Except when your camcorder is connected
with the i.LINK cable)
In more than five minutes after removing the power source
The AUDIO MIX, FLASH LVL, COMMANDER and HiFi SOUND settings are returned
to
their default settings.
Other menu settings are held in memory even when the battery is removed.