Sony Digital 8- TRV240 Operating Instructions Manual page 197

Maintenance information and precautions
Camcorder care
l
Remove the tape, and periodically turn on the power, operate the CAMERA and VCR
sections and play back a tape for about three minutes when your camcorder is not to
be used for a long time.
l
Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,
remove them with a soft cloth.
l
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of solvent which may damage the
finish.
l
Do not let sand get into your camcorder. When you use your camcorder on a sandy
beach or in a dusty place, protect it from the sand or dust. Sand or dust may
cause
your camcorder to malfunction, and sometimes this malfunction cannot be repaired.
Connection to your computer
When inputting the image recorded by Hi8ktandard 8 system into Sony VA10
The Program Capture function of DVgate motion doesn't work. To use this function,
dub the image into a Digital8
E3
or DV tape first, and then input it into your Sony VAIO.
AC power adaptor
l
Unplug the unit from the wall outlet when you are not using it for a long time. To
disconnect the power cord, pull it out by the plug. Never pull the power cord itself.
l
Do not operate the unit with a damaged cord or if the unit has been dropped or
damaged.
l
Do not bend the power cord forcibly, or place a heavy object on it. This will damage
the cord and may cause fire or electric shock.
l
Prevent metallic objects from coming into contact with the metal parts of the
connecting section. If this happens, a short may occur and the unit may be damaged.
l
Always keep metal contacts clean.
l
Do not disassemble the unit.
l
Do not apply mechanical shock or drop the unit.
l
While the unit is in use, particularly during charging, keep it away from AM receivers
and video equipment. AM receivers and video equipment disturb AM reception and
video operation.
l
The unit becomes warm during use. This is not a malfunction.
l
Do not place the unit in locations that are:
- Extremely hot or cold
- Dusty or dirty
- Very humid
- Vibrating
197