Playing
back a tape
To
display
the screen indicators
- Display
function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder. The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
DATA CODE
DISPLAY
About
date/time
and various
settings
Your camcorder automatically records not only pictures on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Use the Remote Commander for this operation.
@ Set the POWER switch to
VCR,
then playback
a tape.
@ Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time --+ various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value) -+ no indicator
Date/time
Various settings
[al
lb1
[cl
IdI
M
VI
[sl
[a]
Time code/Tape counter
[b]
SteadyShot off
[c] Exposure mode
[d]
White balance
[e] Gain
[fl Shutter speed
[g] Aperture value
35