Editing; Dubbing A Tape - Sony Digital 8- TRV240 Operating Instructions Manual

- Editing -
Dubbing a tape
Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Before operation
l
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
l
Press the following buttons to make the indicators disappear so that they will not be
superimposed on the edited tape:
- DISPLAY
- DATA CODE on the Remote Commander
- SEARCH MODE on the Remote Commander
(I) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder. E
(2) Prepare the VCR for recording, then set the input selector to LINE.
n
24
Connect the A/V connecting cable to the AUDIO/VIDEO jack. Refer to the
operating instructions of your VCR.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
AUDIO/VIDEO
A : Signal flow
When you have finished dubbing a tape
Press w on both your camcorder and the VCR.
You can edit on VCRs that support the following systems:
q
8
mm,
HiH
Hi8,
lvusl
VHS,
SlJ!Kl
S-VHS,
@!ZZl
VHSC,
s;(pBm
S-VHSC,
m Betamax,
-1 ED Betamax, ""'w mini DV, w DV or E3 Digital8