Sony Digital 8- TRV240 Operating Instructions Manual page 182

Digital video camera recorder
Table of Contents

Advertisement

Types of trouble
and how to correct
trouble
Symptom
Cause and/or
Corrective
Actions
Digital program editing to a tape
does not function.
l
The input selector on the VCR is not set correctly.
+ Check the connection and set the input selector on the
VCR again (p. 75)
l
Your camcorder is connected to DV equipment of other
than Sony using the i.LINK cable (DV connecting cable).
+ Set it to IR (p. 75).
. You have attempted to set a program on a blank portion of
the tape.
9 Set the program again on a recorded portion (p. 84).
l
Your camcorder and the VCR are not synchronized.
+ Adjust the synchronization (p. 82).
l
The IR SETUP code is incorrect.
+ Set the correct code (p. 77).
l
PB MODE is set to blim/!
in the menu settings.
+ Set it to AUTO. (p. 105)
Digital program editing to a
l
Setting program on a blank portion of the tape is
"Memory Stick" does not function.
attempted.
(except DCR-TRV240)
+ Set the program again on a recorded portion (p. 146).
The Remote Commander supplied
l
COMMANDER is set to OFF in the menu settings.
with your camcorder does not work.
+ Set it to ON (p. 10.5).
l
Something is blocking the infrared rays.
+ Remove the obstacle.
l
The batteries are inserted with + and - incorrectly
matching
+ and
- inside the battery compartment.
+ Insert the batteries correctly (p. 207).
l
The batteries are dead.
+ Insert new ones
(p. 207).
The picture from a TV or VCR does
not appear on the screen even when
your camcorder is connected to
outputs on the TV or VCR.
l
DISPLAY is set to V-OUT/LCD in the menu settings.
+ Set it to LCD (p. 105).
The melody or beep sounds for five
seconds.
l
Moisture condensation has occurred.
+ Remove the cassette and leave your camcorder for at
least one hour to acclimatize (p. 194).
l
Some trouble have occurred in your camcorder.
+ Remove the cassette and insert it again, then operate
your camcorder.
You cannot charge the battery pack.
l
The POWER switch is not set to OFF (CHG).
+ Set it to OFF (CHC).
While charging the battery pack, the
backlight of the display window
does not light.
l
Charging is completed.
l
The AC power adaptor is disconnected.
+ Connect it firmly (p. 13).
l
Something is wrong with the
battery pack.
+ Contact your Sony dealer or local authorized Sony
service facility.
182

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital 8- trv340Digital 8- trv740Digital 8- trv840

Table of Contents