Sony Digital 8- TRV240 Operating Instructions Manual page 121

Using "Memory Stick"- Introduction
Selecting the image size
You can select either of two image sizes
Still images (DCR-TRV740/TRV840 only): 1152 x 864 or 640 x 480.
The default setting is 1152 x 864.
Moving pictures: 320 x 240 or 160 x 112
The default setting is 320 x 240.
(1)
Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select STILL SET (still image) (DCR-
TRV740/TRV840 only) or MOVIE SET (moving picture) in m, then press the
dial.
(4) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as follows:
Still images (DCR-TRV740/TRV840 only): F5* w c46
ME-NU
P
n
320 - WSO
121