Table of Contents
Advertisement
Chapter
02
Basic operation
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
2
Connect your iPod.
Disconnecting your iPod
% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
16
Engb
Flow from startup to
termination
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger only and gently touch the
screen.
2
Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2
Touch the language that you want to
use on the screen.
3
Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
Advertisement
Table of Contents
