Trigger Mode - Motorola DS3508 Product Reference Manual

Trigger Mode

Parameter # 8Ah
Select one of the following trigger modes for the digital scanner:
•
Level (Standard)
time, the aiming dot changes to a standard laser scanning beam for a full decode session. The laser
scanning beam stays on until the
trigger is released. If the trigger is released before the timeout expires, the laser shuts off and no decode
occurs.
•
Two Stage Option 1 (DS3508-ER only)
the aiming dot changes to a standard laser scanning beam for a full decode session. The laser scanning
beam stays on for one-third of the currently configured decode timeout. If the trigger is pulled again while in a
decode session, the scanner beam returns to an aiming dot.
•
Two Stage Option 2 (DS3508-ER only)
the aiming dot turns off. Pulling the trigger twice quickly turns on the standard laser scanning beam for a full
decode session. The laser scanning beam stays on until the
occurs, or the trigger is released.
•
Presentation (Blink) (DS3508-SR/HD/DP only)
detects a bar code in its field of view. After a period of non-use, the digital scanner enters a low power mode
in which the LEDs turn off until the digital scanner senses motion.
•
Auto Aim (DS3508-SR/HD/DP only)
mode. A trigger pull activates decode processing. After 2 seconds of inactivity the aiming pattern shuts off.
User Preferences & Miscellaneous Digital Scanner Options
- Upon trigger pull, an aiming dot appears for a programmable duration of time. After this
Decode Session Timeout on page 4-28
- Upon trigger pull, an aiming dot appears. When the trigger is released,
- Upon trigger pull, an aiming dot appears. When the trigger is released,
- The digital scanner's aiming pattern is consistently on when in auto aim
Decode Session Timeout
- The digital scanner activates decode processing when it
occurs, a decode occurs, or the
occurs, a decode
4 - 9