Trigger Mode
Parameter # 8Ah
Select one of the following trigger modes for the digital imager scanner:
•
Level - A trigger pull activates decode processing. Decode processing continues until the bar code is
decoded, the trigger is released, or the Decode Session Timeout is reached.
•
Blink - This trigger mode is used in presentation (hands-free) mode. The digital imager scanner activates
decode processing when it detects a bar code in its field of view. Decoding range is reduced in this mode.
•
Auto Aim - This trigger mode turns on the red laser aiming pattern when the digital imager scanner senses
motion. A trigger pull activates decode processing. After 2 seconds of inactivity the red laser aiming pattern
automatically shuts off.
•
Host - A host command issues the triggering signal. The digital imager scanner interprets an actual trigger
pull as a Level triggering option.
Level
(00h)
*
Auto Aim
(09h)
User Preferences & Miscellaneous Digital Imager Scanner Options
Blink
(07h)
Host
(08h)
4 - 9