Hand-Held Trigger Mode - Motorola symbol ds9808 Reference Manual

4 - 18 Symbol DS9808 Product Reference Guide

Hand-Held Trigger Mode

Parameter # 8Ah
Select one of the following trigger modes for the digital scanner:
•
Standard (Level) - A trigger pull activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout occurs.
•
Presentation (Blink) - The digital scanner activates decode processing when it detects a bar code in its field
of view. After a period of non-use, the digital scanner enters a low power mode, in which the LEDs turn off
until the digital scanner senses motion.
NOTE Laser scanning is not applicable in hand-held presentation mode.
•
Auto Aim - If the primary trigger (trigger A) is set to imager, this trigger mode turns on the laser aiming
pattern when you lift the digital scanner. A trigger pull activates decode processing. After 2 seconds of
inactivity the aiming pattern shuts off.
Standard (Level)
*
Auto Aim
(00h)
(09h)
Presentation (Blink)
(07h)