Dodge Ram 2004 Service Manual page 559

MIC-WASH-BEAM INPUT CIRCUIT SHORTED —
TEST
3 Turn the ignition off.
Disconnect the Instrument Cluster C2 harness connector.
Disconnect the Multi- Function Switch harness connector.
Measure the resistance between ground and the Wash/beam Select Switch Feed
circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Wash/Beam Select Switch Feed circuit for a short to
→ Replace and configure the Instrument Cluster in accordance with
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
WINDSHIELD WIPER & WASHER
Continued
545
APPLICABILITY
All