Dodge Ram 2004 Service Manual page 508

POWER DOOR LOCKS/RKE
*RKE INOPERATIVE —
TEST
4 Secure a known good transmitter.
Turn the ignition on.
Place transmission in the Park position.
Ensure Vehicle Theft Security System (if equipped) is in Disarm Mode.
With the DRBIII , select ELECTRO/MECH CLUSTER, MISCELLANEOUS, PRO-
GRAM New Fob.
Follow the instructions on the DRBIII screen.
Programming mode will last for 30 seconds. To get out of Programming Mode sooner,
press PAGE BACK.
Lock and Unlock the vehicle using the transmitter.
Does the RKE System operate properly?
Yes → Replace the original transmitter and program all transmitters
→ Replace the Remote Keyless Entry Module and reprogram all
No
5 Using the 9001 RF Detector, follow the instructions on the back of the tester and test
the transmitter several times.
Does the signal strength measure STRONG ?
Yes → Go To 6
→ Replace the transmitter.
No
6 Turn the ignition on
Place transmission in the Park position.
Ensure Vehicle Theft Security System (if equipped) is in Disarm Mode.
With the DRBIII , select ELECTRO/MECH CLUSTER, MISCELLANEOUS, then
PROGRAM New Fob. Follow the instructions on the screen.
Exit PROGRAM RKE.
Activate the Door Locks using the RKE Transmitter.
Did the door locks respond properly to the RKE transmitter commands?
Yes → Repair complete.
→ Replace the Remote Keyless Entry Module and reprogram all
No
NOTE: When repairs are complete, ensure all transmitters used with the
vehicle have been programmed.
Continued
ACTION
that will be used with this vehicle.
transmitters used with this vehicle.
Perform BODY VERIFICATION TEST - VER 1.
transmitters used with this vehicle.
494
APPLICABILITY
All
All
All