Dodge Ram 2004 Service Manual page 479

ALL DOOR UNLOCK OUTPUT CIRCUIT SHORT TO GROUND OR VOLT -
AGE —
Continued
TEST
6 Disconnect the Instrument Cluster C1 connector.
Turn the ignition on.
Measure the voltage between ground and the Door Unlock Driver Right Doors circuit.
Is there any voltage present?
Yes → Repair the Door Lock or Door Unlock Driver Right Doors circuit
→ Go To 7
No
7 NOTE: If this a 2 Door vehicle, answer NO to the question and continue.
Disconnect the Instrument Cluster C1 connector.
Turn the ignition on.
Measure the voltage between ground and the Door Unlock Driver Left Rear circuit.
Is there any voltage present?
Yes → Repair the Door Lock Driver Left Doors or the Door Unlock Driver
→ Go To 8
No
8 If there are no possible causes remaining, view repair.
Repair
ACTION
for a short to voltage.
Perform BODY VERIFICATION TEST - VER 1.
Left Rear circuit for a short to voltage.
Perform BODY VERIFICATION TEST - VER 1.
Replace the Instrument Cluster.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
465
APPLICABILITY
All
All
All