Symptom:
*SEAT BELT WARNING INDICATOR ALWAYS OFF - STANDARD
CAB
SEAT BELT SWITCH SENSE CIRCUIT SHORT TO GROUND
INSTRUMENT CLUSTER
TEST
1
Turn the ignition off.
Disconnect the Seat Belt Switch harness connector.
Disconnect the Instrument Cluster C1 harness connector.
Measure the resistance between ground and the seat Belt Switch Sense circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Seat Belt Switch Sense circuit for a short to ground.
→ Replace and configure the Instrument Cluster in accordance with
No
POSSIBLE CAUSES
ACTION
Perform BODY VERIFICATION TEST - VER 1.
the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
453
APPLICABILITY
All