Table of Contents
Advertisement
Control Panel
1.
Status indicator
Color
Off
Flashing green
Lit green
Flashing red
2.
{Screen Contrast} knob
Adjusts the brightness of the display pan-
el.
3.
{Language Selection} key
Press to change the display language.
4.
{Interrupt} key
Press to make interrupt copies during a
copy run. See
P.68 "Interrupt Copy".
Status
Ready to make
copies
Scanning originals
Copying (You can
scan originals.)
Toner has nearly
run out
5.
{Energy Saver} key
Press to switch to and from Energy Saver
mode. See
P.68 "Energy Saver Mode".
6.
{Clear Modes} key
Press to clear any previously entered
copy job settings.
7.
{Program} key
Press to register or recall a program. See
P.55 "Programs".
8.
{Stop} key
Press to stop a copy job in progress.
9.
{Start} key
Press to start copying. If pressed just after
the machine is turned on, the job will
start after the warm-up period. See
P.70 "Auto Start".
10.
{Sample Copy} key
Use this key to make a single sample
copy set before starting a long copy run.
7
Advertisement
Table of Contents
