Key Operator Tools - Lanier 5484 Operator's Manual

Key Operator Tools

If the key operator code has been registered beforehand, you cannot access the
Key Operator Tools unless you enter the key operator code (up to 8 digits).
Menu
Check/Reset/Print Copy Counter
You can check or print the number of copies made under each user code.
You can also reset each user code counter to 0.
If more than 20 user codes are registered, you can view all the counters using the [Pre-
vious] or [Next] key.
Print Counter List
Reset Counters
Reset All Counters
Program/Change/Delete User Code
You can register, change, or delete user codes (8 digits or less).
Note
Up to 500 user codes can be registered.
Even if you have changed a user code, the counter value will not be cleared.
When the user code is deleted, the counter value will be automatically deleted.
Program
Change
Description
You can print the number of copies under each user code.
To start printing, press the [Print Counter List] key. To stop
printing, touch the [Cancel] key.
You can reset each user code counter to 0.
You can reset all counters to 0.
You can register user codes.
A
Press the [Program] key.
B
Enter the User Code using the number keys.
C
Press the [OK] key.
You can change user codes.
A
Press the [Change] key.
B
Press the User Code you want to change.
C
Enter new User Code using the number keys.
D
Press the [OK] key.
Note
The number of copies made under the old code is added
to that made under the new user code.
Key Operator Tools
331
6