Relationship Between Master Unit And Sub-Unit System Settings - Lanier 5484 Operator's Manual

Connect Copy (Option)
Relationship between Master Unit and
Sub-unit System Settings
This section describes which System Settings are used by the master unit and
sub-unit in Connect Copy mode.
Note
In Connect Copy mode the {User Tools} key on the sub-unit is disabled. To ac-
cess the user tools on the sub-unit, you need to exit Connect Copy mode first.
Reference
See System Settings manual for details.
4 Symbol
—
Menu
General
Function Priority
Panel Tone
Ready Panel Tone
Copy Count Display
System Reset
252
Meaning
The master unit and sub-unit use each setting
Both units use the master unit setting
Unrelated
Depends on the function
Master
unit
—
—
—
Sub-unit Remarks
— When the time set in the
"Copy Reset Timer" of the
user tools (Copier/Document
Server Features) on the mas-
ter unit passed and the Con-
nect Copy is canceled, and
then the time set in the "Sys-
tem Reset"of the user tools
(System Setting) passed, it re-
turns to the function defined
by the "Function Priority" of
the User Tools (System Set-
tings) setting.
— The copy counter is always
displayed in count up mode.
Interrupt mode on the sub-
unit will be cleared by this
timer.