If You Cannot Exit Connect Copy - Lanier 5484 Operator's Manual

If You Cannot Exit Connect Copy

Machine Status
Nothing happens when
you press the [Connect] key.
If Your Machine Does Not Operate as You Want
Cause
Originals are being
scanned or copied.
There is a paper misfeed in
either the master unit or
sub-unit.
The master unit {Stop} key
was pressed and scanning
of the original has been in-
terrupted.
The {Stop} key was pressed
on either the master unit or
sub-unit and copying has
been interrupted.
Action
Press the master unit
{Stop} key and them press
[Yes] key to cancel scan-
ning or copying.
Clear the paper jam in the
master unit or sub-unit.
Reference
P.286 " x Clear-
See
ing Misfeeds"
P.302 " e Remov-
See
ing Jammed Staples"
If the "Cover Open" dis-
play appears, follow the
instructions given.
For any other problems,
follow the instructions that
are displayed.
To exit Connect Copy
mode, press the master
unit {Stop} key, then press
the [Connect] key.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [Cancel] key.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [Cancel] key.
5
269